Leak Detection and Repair Services in Rockland County, NY

Leak detection and repair in Rockland County, NY relies on advanced pressure testing and diagnostic tools to locate hidden leaks in pipes, fittings, and pool shells before they cause water loss or structural damage.

Technicians use pressure testing equipment to isolate sections of plumbing, then apply specialized listening devices and dye tests to pinpoint the exact leak location without unnecessary excavation.

A pool that loses more than a quarter inch of water per day likely has a leak beyond normal evaporation. Leaks can hide in underground pipes, behind walls, or within the pool shell itself. Visual inspection rarely reveals these problems.

Pressure testing involves sealing off plumbing lines and monitoring pressure gauges. A drop in pressure confirms a leak in that section. Once the area is narrowed down, acoustic sensors detect the sound of escaping water. Dye testing near suspected cracks or fittings shows water movement invisible to the naked eye. These methods save time and reduce the cost of repairs by avoiding guesswork and exploratory digging.

Undetected leaks erode soil around pool structures, undermine decking and coping, increase water bills, and promote algae growth due to constant fresh water diluting sanitizer levels.

As water escapes underground, it washes away the compacted base supporting your pool and patio. Over time, this causes settling, cracks in coping stones, and uneven decking. In severe cases, voids form beneath the pool shell, risking structural failure.

You'll notice higher water bills and the need to add water more frequently. Because fresh water dilutes chlorine and other chemicals, you'll also spend more on balancing your pool. Algae thrives in undertreated water, creating a cycle of poor water quality and extra maintenance effort. For help managing both leaks and ongoing water care, explore pool maintenance services in Rockland County that include system inspections and chemical management.

Many leaks in plumbing lines, skimmers, and fittings can be repaired without draining the pool, but shell cracks and large structural issues often require lowering or emptying the water.

Underwater epoxy and sealants work well for small cracks and fitting leaks. Technicians apply these materials while the pool is full, allowing you to resume use quickly. Plumbing leaks outside the shell are usually accessible without draining.

Larger cracks, beam damage, or widespread shell deterioration need the water level lowered so repairs can cure properly. In some cases, full resurfacing becomes the most cost-effective solution when multiple leaks appear in aging plaster. Your technician will recommend the best approach based on the leak's size and location.

Rockland County's varied soil conditions, including clay and rocky terrain, cause uneven settling that stresses pool structures and creates leak-prone cracks over time.

Clay soils expand when wet and contract during dry periods, shifting the ground beneath your pool. Rocky areas may have inadequate compaction during original construction, leading to voids that allow movement. Both conditions increase the likelihood of shell cracks and pipe separation at joints.

Proper site prep during construction and vigilant monitoring afterward reduce these risks. If you notice cracks in your coping or uneven deck surfaces, schedule an inspection before small issues become expensive emergencies. For pools needing major structural work, consider pool plaster resurfacing services in Rockland County that address both cosmetic and structural concerns in a single project.

Catching and repairing leaks early protects your investment and prevents expensive secondary damage. Modern diagnostic tools make finding even the smallest leaks faster and more accurate than ever.

The Backyard Bosses uses advanced leak detection technology and proven repair methods to solve water loss problems throughout Rockland County. Start your inspection by calling 845-370-2056.